Selecting The Frequencies To Scan - Uniden BCT-12 Operating Manual

Operating Instructions

Selecting the Frequencies to Scan

Once you have selected the State or Canadian province, you are
ready to select the frequencies you want to scan.
Scanning Highway Patrol Frequencies
This mode scans State Police/Highway Patrol frequencies by
state. Mobile extender and other enforcement channels are priority
checked for activity.
Note: The priority check can be turned off by pressing and
holding the Alert key for 1.5 seconds.
1. To scan highway patrol
frequencies exclusively,
M
press the
until HP is blinking in the LED
display.
2. The HP LED lights up.
3. While scanning, the BCT-12
displays the state code for
the state you selected. When
the BCT-12 detects an active
frequency, it displays HP in
the LED display and stops for
two seconds before it
resumes scanning.
20
key repeatedly
MUTE ALT
HP
W/A
HOLD
MUTE ALT
HP
W/A
HOLD
MUTE ALT HP
TX
W/A LP
HOLD
MUTE ALT HP
HP
HOLD W/A LP
HP
LP
HP
LP