Advertisement
Available languages
Available languages
4 Installation
1. Switch off the appliance
2. Plug in the interface adapter at the KUP connection
3. Switch on the appliance. The interface adapter is automatically recognized by the
appliance.
Establish the WiFi connection:
1. The balance creates a WIFI access point as soon as it has started up (WLAN
symbol in the balance display appears).
Use your computer to connect to this access point. The SSID (name of the bal-
ance's access point) is „AI_THINKER_xxxxxx"
2. Using a web browser visit the website
In the website:
A. Set the mode „Mode" to "apsta"
B. Enter information about the network which you want to integrate the balance
into (network „AP Name" and password „AP Password")
C. Save the settings „Save" and update the site
3. Separate the access point from the computer
4. Cut the power supply to the balance for a short moment
5. Connect the computer again to the access point of the balance and update the
website
D. Now the IP-address „IP address" is displayed
2
http://192.168.4.1/
.
TYKUP-05-A-IA-def-2312
Advertisement
