Roland DM-80 Owner's Manual page 29

Mi System Real Time Message
When the system parameter MIDI Ciock output is on, sends this message in
accordance with the tempo map.
@ Timing Clock
Status
F8H
@ Start
Status
FAH
@ Continue
Status
FBH
@ Stop
Status
FCH
© MIDI Time Code
Mi System Common Message
© MTC quarter frame message
Fl < message >
Fl = System Common status byte
< message > = Onnndddd
nnn = Message Type
O=Frame count LS nibble
1=Frame count MS nibble
2=Seconds count LS nibble
3 = Seconds count MS nibble
4= minutes count LS nibble
5 = minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble and SMPTE Type
dddd = 4 bits of binary data for this Message Type
Frame count xXxxy yyyy xxx : Reserved (= 0)
. yyyyy : Frame # (0-29)
Secouds count xxyy yyyy xx : Reserved (= 0)
yyyyyy : Second (0-59)
Minutes count xxyy yyyy xx : Reserved (= 0)
yyyyyy : Minutes (0 - 59)
Hour count XYYZ 2222 x : Reserved (= 0}
yy : Time code type
O= 24 Frame/Second
i= 25 Frame/Second
2= 80 Frame/Second (Drop Frame)
3= 30 Frame/Second (Non - drop)
zzzzz_: Hour (0 - 28)
When the parameter MTC Output is on, the recorder sends the MTC quarter
frame message while running.
ROLAND DM-80-4 / DM-80-8 ® OWNER'S MANUAL 27