Table of Contents
Advertisement
Daylight sync flash [
]
As you press the mode switch button and let
the symbol [ p ] appear in the LCD panel,
the flash fires even if the subject is bright, serving
as daylight sync (fill-in) flash. When taking
a portrait in the back-lighted situation or in the
shade of trees, the subject often results in under¬
exposure because the meter mainly measures
the bright background. The daylight sync flash
helps you expose the subject and background
properly.
Uncompensated
Compensated
• Press the shutter button half-way, make sure
the red lamp glows, and release the shutter.
The flickering red lamp indicates flash charging.
• When also using the flash as an auxiliary light
in the daytime, shoot the subject within the flash-
effective range.
• If you turn the main switch off and then on
while the "daylight sync flash" symbol (
] is on
display, the flash will be switched to the ordinary¬
shooting mode (
].
16
Advertisement
Table of Contents
