Subscribe to Our Youtube Channel
Related Manuals for SSS Siedle DCSF 600-0
Summary of Contents for SSS Siedle DCSF 600-0
- Page 1 Programming instruction DoorCom switching/remote control interface DCSF 600-0 Addition to the programming instructions DCA 612-0/ DCA 650-0...
- Page 2 General “Input configuration” / “Output configuration” change. DoorCom switching/remote Both menu points are integrated control interface DCSF 600-0 into the programming sequence The DCSF 600-… is an interface before the service functions. accessory which is integrated in the DCA 612-… or DCA 650-… .
- Page 3 Contents Programming structure General remarks DCSF 600-… configuration Changing the input configuration DCSF 600-… configuration Changing the output configuration...
- Page 4 DCSF 600-… configuration Changing the input configuration In the main menu Input Input config. configuration, it is possible to change with <OK> selectively define the function of each of the three inputs. Press the programming button to Press the programming button reach the selection window for the inputs.
- Page 5 DCSF 600-… configuration Changing the input configuration Active function The function set here (see function table) is selected when the input changes from passive to active, i.e. current flows, e.g. a switch Display Act. fct.: connected to input 1 is closed. change with <OK>...
- Page 6 DCSF 600-… configuration Changing the input configuration Passive function Display Passiv fct.: The call number entered here (max. change with <OK> 22 digits) is dialled when the input changes from active to passive; i.e. no current flows, e.g. a switch connected to input 1 is opened.
- Page 7 Configuration DCSF 600-… Changing the output configuration In the main menu Output configu- Display Output config. ration, it is possible to selectively change with <OK> define the function for each of the three outputs (relays). Selection: Switch, timer, door release, light, monitor switch and NSC (secondary signalling controller) function.
- Page 8 Configuration DCSF 600-… Changing the output configuration Pressing the scroll button brings you Press the scroll button to the above described time setting. Display Time output change with <OK> Pressing the programming button Press the programming button allows you to change the time. Display Time output 0,4s...
- Page 9 S. Siedle & Söhne © 2001/ 10.2001 Printed in Germany Best. Nr. 0-1101/ 031777 GB Postfach 1155 D-78113 Furtwangen Bregstraße 1 D-78120 Furtwangen Telefon +49 7723 63-0 Telefax +49 7723 63-300 www.siedle.de info@siedle.de...
Need help?
Do you have a question about the DCSF 600-0 and is the answer not in the manual?
Questions and answers