Built-In Model; Service Centre - AEG MICROMAT DUO 220 Operating Instructions Manual

Build-in model
To install the appliance in a hanging kitchen cabinet, use
the appropriate mounting frame.
Note the relevant Instructions for Installation and Connection.
The oven must be connected by means of a proper plug and pro¬
tected with a 16-A-L automatic or a 16 amp slow fuse.
When the oven is installed, there must be a possibility of discon¬
necting it from the mains with a contact break of at least 3 mm on
all poles.
A suitable size of LS switch, or a melting or fly-out fuse, are suit¬
able contact-breakers.
Service centre
If you cannot find any reference to a particular fault in the operat¬
ing instructions, please contact AEG Service.
When doing so, quote the E-No. and F-No. of your oven, which
you will find on the rating plate (arrow).
Indication of these numbers helps the Service centre to identify
the required spare part so that the engineer can repair the oven
on his first visit, thus saving you additional costs caused by re¬
peated trips of the service engineer.
So that these numbers are always to hand, please enter them
here.
E-No.
F-No.
26