Installing And Connecting; Table Top Model; Built-In Model - AEG MICROMAT 153 E Operating Instructions Manual

Installing and Connecting

The oven should be set on a work surface at least 85 cm above floor
level. To ensure the stability of the microwave oven, the front left foot
is adjustable (5 positions). Turn it to raise or lower the appliance.
Make sure that nothing obstructs the ventilation louvres and that air
may circulate freely around the oven.

Table top model

A gap all around the oven is necessary in
order to ensure perfect ventilation:
Above:
Behind:
Either side:
Connect to a plug socket with protective
earth contact and fused with a 10 A-L
automatic device or a 10 A slow-blowing
fuse.

Built-in model

To install the appliance in a kitchen cabinet, use the appropriate mounting frame.
Note the relevant instructions for installation and connection. When building in to
a high cabinet, you may use the liftdoor. Note the relevant information for installa-
tion and connection given in the operation instructions of the lift door.
!
Attention!
Never operate the microwave oven with the lift door closed. Such operation would
damage your appliance and invalidate the guarantee.
Connect to a plug socket with protective earth contact and fused with a 10 A-L
automatic device or 10 A slow-blowing fuse. When the oven is installed, there must
be a possibility of disconnecting it from mains with a contact break of at least 3
mm on all poles.
A suitable size of LS-switch, or a melting or fly-out fuse, are suitable contact-brea-
kers.
This appliance complies with the following EC Directives :
73/23/EEC of 10.02.1973 - Low voltage directive 89/336/EEC of
03.05.1089 (incl. Amendment Directive 92/31/EEC) - EMC
(Electromagnetic Compatibility) Directive.
Microwave Power: 900 Watt
8
14 cm
10 cm
5 cm
12 cm
5 cm