To Receive - Uniden PC68XL User Manual

PC68XL.qxd 2/25/99
T T o o R R e e c c e e i i v v e e
Be sure that the power source, antenna, and microphone
are properly connected before proceeding.
1. Turn unit ON.
VOLUME Control to a
comfortable level.
2. Select CHANNEL.
3. Set switch to NB/ANL.
Dynamic Squelch Control automatically sets Squelch to the optimal level
for stronger transmission and signal clarity. To scan for weaker signals,
turn off Dynamic Squelch Control and perform the following steps:
4. Turn SQUELCH fully clockwise
so only strong signals can get through.
4b. Turn SQUELCH fullY counter-
clockwise until you hear a hiss.
Everything gets through - noise, weak
signals, and strong signals.
4c. Turn SQUELCH back clockwise until
the hiss stops. Only clearer signals get
through.
10:07 AM Page 7
Set SQUELCH only when
the radio is not receiving
a strong signal.
7