Download Print this page

GE GSD970 Use And Care Manual page 4

Hide thumbs Also See for GSD970:

Advertisement

HOW TO OPERATE YOUR DISHWASHER
I
STEP 1. Load your dishwasher with dishes, silverware,
pots, pans, bowls, etc., according to the Loading section.
STEP 2. Add detergent to the detergent dispenser.
Make sure the Cycle Indicator Dial is at OFF position
before adding detergent. (See Detergent Guide.)
Use rinse aid agent to help prevent spotting.
Occasionally check to insure that rinse agent
container is at least half full. (See How to Use
a Rinse Agent section. )
STEP 3. Select drying option.
HEATED DRYING. Turns the
drying heater on for fast drying.
ENERGY SAVER (no-heat boost).
Turns the drying heater off to save
energy. Dishes will dry naturally
over a longer period such as overnight.
If you need your dishes sooner, open the dishwasher
door after the cycle is complete to reduce the natural
drying time.
Note: The ENERGY SAVER option will also cancel the
WASH HEAT BOOST. To obtain WASH HEAT BOOST
without HEATED DRY, select only the WASH HEAT
BOOST option. (See Energy-Saving Tips section).
STEP 4. WASH HEAT BOOST Option
WASH HEAT BOOST. This cycle
will be extended for 21 minutes while
the dishwasher automatically heats the
water for good washing and drying. The
entering water mu~~~ at least 120°F.
When this option is%e]ected entering water must
be at least 140°F. To test water, see How to Test Water
Temperature section.
4
STEP 5. Select the wash cycle and start the dishwasher.
(See Cycle Selection Hints:)
For POTSCRUBBER, NORMAL
WASH and LIGHT WASH cycles:
a. Push selected cycle button.
b. Latch the door.
c. Slowly turn Cycle Indicator
Dial to ON position to start
the cycle. You will hear the motor start. There is a
time delay between start-up and water fill so you will
not hear any wash action right away.
To obtain the benefits of a complete cycle, be careful
that you do not turn the dial any further than
necessary to start the dishwasher. If your dishwasher
drains into a food waste disposer, operate the disposer
until it is empty before starting the dishwasher.
For RINSE & HOLD cycle:
a. Be sure door is unlatched.
b. Select ENERGY SAVER
drying option.
c. Slowly turn Cycle Indicator Dial
to the ON position.
d. Latch the door to start the cycle
WASH HEAT
BOOST
Cycle Selection Hints
important to follow the Loading instructions.
is
casseroles with dried-on or baked-on soils. Everyday
dishes may be included.
NORMAL WASH—For loads of everyday dishes,
glasses and cookware with medium soils. Designed
to yield high performance on normal soils.
LIGHT WASH—For dishes that have been /)re-
soiled dishes with soils that have not dried on.
RINSE & HOLD—For rinsing partial loads which
will be washed later. Do not u,~e detergerlt. Delay
Start i.s not recommended,fi)r thi.~ cycle.
SCRUBBER WASH
I
I
RINSE
ASH & HOLO

Advertisement

loading