Circuit Adjustments - Sony TRINITRON KV-M1450A Service Manual

KV-M145
4-1. ELECTRICAL ADJUSTMENTS
Service adjustment to this model can be performed
with the supplied Remote Control Commander RM-836.
SECTION 4
CIRCUIT ADJUSTMENTS
Range of adjustments available from the on screen menu
HOW TO ENTER INTO SERVICE MODE
1. Turn on the main power of the set and enter into
stand-by mode.
2. Press the following sequence of buttons on the Remote
Control Commander.
vA
=O
(ON SCREEN (DIGIT 5)
DISPLAY)
"TT-- " will appear in the top right corner of the screen
Other status information will also be displayed.
3. Press the MENU button on the Remote Commander to
obtain the menu on the screen.
Software version
4. Press the Blue (Next) or Green (previous) buttons to
select the adjustment item from the table.
5. Press the Yellow (+) or Red (-) buttons to change the data
as required.
6. Turn off the power to quit the service mode when
adjustments are completed.
90
system.
[ Adjustment Set Range
16:9 Off Select ON/OFF
BG-L, BG-DK
System Select UK, Eire, BG
Text Select EAST/WEST
AGC Adj. 00 - 63
PLL Adj. 00 - 63
B&W Delay Adj. 00 - 63
Ver Size Adj. 00 - 63
Ver, Breath 00 00 - 63
Par, Amp! 00 00 - 63
Par, Tilt 32 00 - 63
V, Linear Adj. 00 - 63
V, Cen or EW Adj. 00 - 63
V, Position 42 00 - 63
H, Centre Adj. 00 - 63
Blue HWB Adj. 00 - 63
Green HWB Adj. 00 - 63
Red HWB Adj