Table of Contents
Advertisement
HOW TO SET THE INTERNAL CLOCK
Ex. To set the clock to 8:05 PM, follow the steps below.
1 Press TIMER/BLOCK once to change from "normal
page" to "clock page".
"clock page"
2 Press 0, 8, 0, 5, AM/PM (0 necessary).
oe —*|
08:05pm
3 If you have made a mistake, press CLEAR and return to
step 2.
If you have performed the operation correctly, press
ENTER.
The numbers will "wink" to indicate that the clock has
been set.
(The 0 in front will disappear.)
8:05pm
The "AM"/"PM" indication will disappear after 2
seconds.
To summon "TIMER page", press TIMER/BLOCK before
the "AM"/"PM" indication disappears.
To return to "normal page", press TIMER/BLOCK after the
"AM"/"PM" indication has disappeared.
To reset the clock, summon "clock page" and press
CLEAR before the "AM"/"PM" indication disappears. Then
follow the steps above from step 2.
12:00 AM stands for midnight.
12:00 PM stands for noon.
12
HOW TO SET THE PROGRAM START
TIMER
Make sure that the clock has been set correctly before
setting the program start TIMER.
Ex. To set the TIMER for a program which begins at
10:30 PM on channel 12, follow the steps below.
1 Press TIMER/BLOCK once to change from "normal
page" to "clock page".
"clock page"
2 Press TIMER/BLOCK before the "AM"/"PM" indication
disappears and summon "TIMER page".
"TIMER page"
3 Press 1, 0, 3, 0, AM/PM, ENTER.
Numbers will "wink" to indicate that the time has been
set.
10:30pm |
=CH.
8:05pm
4 Press 1, 2, ENTER (0 not necessary).
Numbers will "wink" to indicate that the channel has
been set.
10:30em
CH.
12
8:05pm
The TIMER indicator will light up to indicate that the
TIMER has been set.
If you have made a mistake, press CLEAR and return to
step 3.
Advertisement
Table of Contents
