Pioneer DW-S114X Service Manual page 41

Cd-rom writer

6. DISASSEMBLY

e Disassembling the Front Panel

(Fig. 1 and 2)

—

two screws at both sides.)

tray. (Fig. 1)

(Refer to Note 1 when opening the tray manually.)

. Remove

the tray bezel. (Lifting up the tray bezel by

ies)

pushing two hooks.)(Fig. 1)

4. Remove the lead wires from cord stopper. (Fig. 1)

Rear view

Fig. 1

5. Remove the two screws ®. Pushing the two hooks ®)

and two hooks © and pull out the front panel. (Fig. 2)

Front panel

. Remove the bonnet.(Remove three screws at rear and

Press the OPEN/CLOSE( & ) button and pull out the

-S$114x

Note 1 : How to open the tray manually (Fig. 3)

1. Loosen the screw (—) fixing the clamp motor.

2. Taking care not to drop the steel ball of the tip of the

gear section of the clamp motor, remove

the clamp

motor and apart from the engaging section ® of gear.

3. Turn the clamp cam counterclockwise to the position

where the lever switch turns ON. (Set to the state that

the clamp holder is raised.)

4. Mount the clamp motor again. (Drive the screw.)

5. Push the tray from behind to open it.

Clamp motor

Clamp cam

Clamp holder

Clamp mechanism section

Fig. 3