50° to 104°F (10° to 40°C) Note: Do not turn on the scanner unless it is within this range. If the scanner has been stored or transported outside of this range, allow it to return to within this range before turning on.
Page 4
Twain compliant application software or Mac plug-in into your computer. c. Install the SilverFast Ai driver first before you connect the film scanner to the host computer! Refer to installation instructions noted in the SilverFast Ai cd booklet.
Page 5
Please use 35mm filmstrips at least 3 frames long (recommend 4 frames long). The scanner will load the filmstrip automatically when you insert 3 frames of film. You can use color negatives, color slide film, or black and white negative film.
Page 6
Scanning with PhotoShop Elements – Setup Follow the steps in this section each time you wish to use the scanner with Adobe Photoshop Elements. 1. Turn on your computer and scanner. The upper-right LED light is on when scanner is connected with power.
Need help?
Do you have a question about the PowerLook 180 and is the answer not in the manual?
Questions and answers