Samsung AC Series Install Manual page 19

2. preparation of Cabinet installation
◆ Pre-prepare before installation
④ Open the bag shielding of the front module. Hold the internal COVER-CORNER, take out the set, and
open the AL-Bag and disconnect the AL screws (4 in total).
⑤ Disconnect the screw of the COVER-CORNER part. (4 locations)
※ When removing the cover-corner, install the white PAD without disassembling it to prevent damage to the front module.
Al-Bag
Bag Zipper open
Fig.4 Before screen check,
remove PAD and attach SPACER-EVA
(Fig.4)
(Fig.5)
When moving the module, two people move
the module vertically as shown in the figure
above.
18
Carefully place the module on the PAD.
side VIEW
Fig.5 remove Cover Corner
LED R&D Lab(VD)
SCREW POINT
PAD