Geevon T228137 User Manual

GEEVON WIRELESS POOL THERMOMETER
Item No.T228137
User Manual
Thank you for purchasing T228137 pool ther-
mometer
Please take a moment to read this guide and
store it for future reference.
1
3
4
5
6
A B
/ALARM
13
14
15
2
C D 10 E F
MODE
Unit displays
1.Time display
2.Indoor temperature
3.Alarm
4.Channel select
5.Pool temperature
6.Alert signal
7.Pool highest temperature alert
8.Temperature trend
9.Pool lowest temperature alert
10.Hang hole
11.Battery Compartment 3xAAA (not included)
12.Pedestal
13.Sensor temperature display
14.Transmission light
7
15.Temperature sensor
8
Buttons
9
A: DOWN and alarm button
B: UP button
C: Channel select button
D: Snooze and light button
E: Mode (set ) button
Main function:
1. Time display
2. Indoor temperature display(℃/℉）:0℃ - 50℃
& 32℉ - 122℉
3. Pool temperature display(℃/℉）: -40℃ - 70℃
& -40℉ - 158℉
4. 12HR & 24HR
11
5. ℃ & ℉
12
6. Pool temperature
7. Highest and lowest temperature in the pool
8. Pool temperature alarm
9. Alarms with snooze function
10. Low battery indicator
11. Backlight
12. 3 channels for remote sensor
1. Setting up power supply Base device
Proceed as follows:
1.Remove the battery compartment cover.
2.Insert the batteries into the battery compartment.
3.Ensure that the battery polarity (+/-) is correct.
4. Replace the battery compartment cover.
Remote sensor:
1.Rotate right to open the sensor.
2.Insert the batteries into the battery
compartment. Ensure that the battery polarity
(+/-) is correct.
3.Press CH button to set the channel selector
switch to the desired channel.