Table of Contents
Advertisement
12.2 Attaching the rails
Place the two hooks at the top of the rail into the up-
1.
per holes.
2.
ATTENTION!
Incorrect assembly
Never move the rail before the two hooks are se-
▶
cured fully in the upper holes. Otherwise the
enamelled coating may be damaged and break.
Appliance door
13 Appliance door
It is normally sufficient if you clean the outside of the
appliance door. If the appliance door is very dirty on
the inside and outside, you can remove the appliance
door and clean it.
13.1 Door hinges
WARNING ‒ Risk of injury!
When the hinges are not secured, they can snap shut
with great force.
If you open the appliance door, ensure that the lock-
▶
ing levers are fully open or fully closed.
Both hooks must be inserted fully into the upper
3.
holes. Move the rail down slowly and carefully, and
hook it into the lower holes.
Hook both rails into the side walls of the oven.
4.
If the rails are fitted correctly, the distance between
the two upper shelf positions is greater.
The oven door hinges each have a locking lever.
1.
When the locking levers are closed, the oven door
is secured in place.
It cannot be detached.
Appliance door en
17
Advertisement
Table of Contents
