Download Print this page

Rotel RCD 950 Owner's Manual page 3

Stereo compact disc player

Advertisement

damage the circuitry and will void your warranty.
If you are in doubt about the correct
voltage for this
CD
player we suggest that you please read the label on the back panel, the
label on the packing carton or consult your
ROTEL/i/ fi AUTHORIZED DEALER
for
confirmation of the correct voltage.
Connect the
Power Cord
to your wall socket for AC power. When you wish to disconnect the
power cord from the wall always hold the plug firmly and then pull it out of the wall socket.
Do
not unplug the power cord from the wall by pulling the cord only, This may damage the power
cord and create a hazardous condition.
We recommend that the RCD 950 be connected to the
mains' wall socket or an AC power line filter, not an extension cord.
If you wish to clean the cabinet on the RCD 950 we suggest that you clean it with a soft, DRY
cloth. A/ever
use cleaning compounds or solvents to clean the cabinet as they may damage the
finish or remove the labels.
They could also damage the circuitry if any residue falls inside the
CD player.
There are
NO
user serviceable parts inside the RCD 950.
Please do not open the cabinet
as
this will expose you to the risk of potentially dangerous high voltage, the risk of shock
and the LASER inside could also be HAZARDOUS to your health and eyesight.
This could
also damage the circuits and possibly void your warranty.
Please refer to this drawing of the Front Panel when reading the section about Controls and the Display
on the RCD 950.
CONTROLS ON THIS CD PLAYER
The
POWER
button will turn the CD player
ON
and
OFF.
Push it in and the RCD 950 will turn
ON. The
POWER INDICATOR LIGHT
and the
DISPLAY
will illuminate at the same time. If you
push the Power button again the power will go OFF and the Power Indicator Light and the
Display will extinguish.
The
OPEN/CLOSE, PLAY, STOP, PAUSE AND TRACK
buttons are
underneath
the Display.
The
PROGRAM, SCAN, RANDOM, REPEAT, A to B, TIME,
and
SEARCH
buttons are to left of
the loading tray. The Display panel includes the
REMOTE SENSOR
for receiving the Infra Red
signals from the
REMOTE CONTROL HANDSET. Please be certain not to block this as the
Remote Control Handset will not function if this is covered or blocked.
The
Open/Close (OPN/CLS)
button will open the drawer after you have pushed it. The Display
will read
OPEN.
A second push of the button will Close the drawer. The Display will read
00
while the drawer is Closing. The Display will first show
00
and then
NO DISC
when there is no
CD in the RCD 950.
3

Advertisement

loading