Table of Contents
Advertisement
Windows NT users
Insert the Installation CD into your CD-ROM
drive. Type D:\driver and click OK. If your CD-
ROM drive uses a different letter, type that
letter in place of "D." Select the USR 10/100
Mbps Ethernet Network Card and click OK.
Follow the on-screen instructions.
Click Windows Start, Settings, and then
Control Panel. Double-click Network and
click the Adapters tab. Click the Add button
and then click the Have Disk button.
When you return to the Network window,
click Close. Remove the Installation CD from
yout CD-ROM drive. You will then be
prompted for the TCP/IP properties. Select
the USR 10/100 Mbps Ethernet Network Card
from the adapter pulldown. Select Obtain
an IP address from a DHCP server and click
OK. Follow the on-screen instructions and
then click Yes to restart your computer.
Windows XP Users
When the Found New Hardware Wizard
detects the NIC, select Install from a list or
specific location and click Next. Select
Search for the best driver in these
locations and then select Include this
location in the search: .
Insert the Installation CD into your CD-ROM
drive. Type D:\driver and click Next. If your
CD-ROM drive uses a different letter, type
that letter in place of "D."
After the driver installation is complete,
click Finish to complete the installation
procedure.
4
Advertisement
Table of Contents
