Installation Procedure; Assembling And Preparing; Unpacking - LG LB63 Series Owner's Manual

18 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
NOTE
y Image shown may differ from your TV.
y Your TV's OSD (On Screen Display) may differ slightly from that
shown in this manual.
y The available menus and options may differ from the input source
or product model that you are using.
y New features may be added to this TV in the future.
y The TV can be placed in standby mode in order to reduce the
power consumption. And the TV should be turned off if it will not be
watched for some time, as this will reduce energy consumption.
y The energy consumed during use can be significantly reduced if the
level of brightness of the picture is reduced, and this will reduce the
overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network
connection is made.
* If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing
accessories, contact the local dealer where you purchased your product.
The illustrations in this manual may differ from the actual product and
item.