Mounting; Optics; Control - Chroma Color One 100X User Manual

2.3 Mounting

The Color One 100X is built with a split yoke system for floor mounting and overhead hanging
applications. Secure the fixture with a safety bond when hung. A provision for a fixing hold is built into
the fixture.

2.4 Optics

The Color One 100X is built with an optical lens that provides a fully homogenised beam angle of
approximately ~ 18°.

2.5 Control

The Color One 100X is controlled remotely via ANSI E1.11 USITT DMX512-A protocol or can operate
as a standalone unit with the wireless IR Remote. The control functions can be accessed through the
LCD display at the rear of the fixture with 4 push buttons.
Back
Arrow
Up Arrow
Down
Arrow
Exit
Power-Up Display:
On power-up, the display shows the Brand, Model Name and Software Version for 5 seconds then
goes on to show the Main Menu. The Main Menu shows:
•
Model Name
•
DMX Status
•
DMX Address
•
Set Control Personality (Mode)
•
Number of Assigned Channels
Display Mode:
The LCD is backlit when you access the menus. This will switch off when left undisturbed for 10
seconds.
Color One 100X User Manual V1.7
(Enter) Stores the menu
choice
Increases (+) the mode level
or value
Decreases (-) the mode level
or value
Back to the previous menu
www.chroma-q.com
6
Jan 2020