Table of Contents
Advertisement
SENSOR_VALUE
SOFTWARE_VERSION_LABEL
2.8 Thermal Performance
The internal cooling system of the Color One 100X is by convection and the fixture is built with
automatic protection.
temperature reaches the maximum limit due to extreme ambient conditions.
3. Troubleshooting
Troubleshooting is a process of elimination. First, rule out the other field factors (i.e. bad
connections, faulty cables and power supplies). For technical support and/or parts, please contact
your selling dealer or the offices listed in this manual.
Sympto
m
Fixture does not
respond
to DMX control.
Low LED output.
Color One 100X User V1.7
Manual
Yes
Yes
The fixture's automatic protection reduces the output when the internal
Possible
Cause
Set to wrong or different DMX address.
Bad cable connecting DMX control and
fixture.
Bad in/through connection between
fixtures.
adjacent
Internal temperature is over the limit.
www.chroma-q.com
No
X
No
X
Check DMX address and Mode
settings.
Check/replace DMX run from
console.
the
Check area ventilation.
14
Temperature
o
in C
Current
Version
Solutio
n
Jan 2020
Advertisement
Table of Contents
