Page 4
This user manual will help you assemble and operate your new Electric Scooter. Be sure to read ALL OF THE INFORMATION in this manual before riding. NOTE TO ALL RIDERS UNDER 18 YEARS OF AGE: It’s very important that you get parental permission before riding your Hoverboard.
Page 5
Don’t ride until you read this ALWAYS wear a helmet when riding your hoverboard. Make sure your scooter has a full battery before taking it out to ride. Always be aware of local road laws, and follow them. Do not ride the scooter under the influence of drugs or alcohol. Always respect pedestrians.
Abuse - We do not cover physical damage due to negligent care and extreme riding. Whenever you ride the GOTRAX hoverboard, you risk severe injury or even death from loss of control, collisions, and falls.Use caution and ride at your own risk.
Page 7
Unpack You should find each of these items in your box: 1. Hoverboard 2. Approved Power Adapter / Charging Unit Remove all packaging material, then inspect each item for any accidental damage that may have occurred during shipping.
Page 8
Get to know your hoverboard The hoverboard comes fully assembled. Footpad Footpad Blue LED Blue LED Charger Port Power Button Specifications 6.2mph 3.1miles 176lbs 25.2V 2.6Ah DC29.4V 0.6A 5 hours AC100-240V 50/60Hz 0.8A Max.
Page 9
Charge your hoverboard Before using the hoverboard, you must charge the battery. 1. Insert the charging pulg into port. 2. The charger box will have a green light when fully charged and a red light when charging. 3. Charging Time: 5 hours.
Page 10
Hoverboard Functions To power the hoverboard on, press and hold the Power Button on the back of your hoverboard for 2 seconds. To power the hoverboard off, press and hold the Power Button on the back of your hoverboard for 2 seconds. Forward Acceleration: Gently push down with your toes.
Page 11
Low Battery: When the hoverboard is low on battery and ablout to die,the hoverboard will beep and flash red on the LED lights. Once it starts beeping and you see the red LED light, get off of the hoverboard and charge. Overheat Alarm: The motor will overheat after a long time of high speed running.
Riding Tips 1. You will want to start riding your hiverdoard by mounting the board from the rear. The rear of the board can be identified by the power button and the charging port. 2. Place your hoverboard on the ground directly in front of your feet. Step with one foot onto the platform, and then quickly step up onto the hoverboard with your second foot.
Maintenance & Repair If you regularly clean and maintain your electric hoverboard, it will extend its life. Cleaning and storage: If the scooter is dirty, wipe it clean with a soft damp cloth. DO NOT use alcohol, gasoline, kerosene, or other corrosive chemical solvents to clean the hoverboard.
Page 14
5. Press the power button to turn on. The hoverboard will be calibrated and ready for galactic adventures. NOTE: You may have to repeat the above process multiple time in order to fully reset and calibrate your hoverboard. For example, you may have to go through the process 3 times in a row before the calibration fully takes effect.
Battery Information Only use the approved GOTRAX power adapter to charge your hoverboard, others may cause risk of fire & equipment may be damaged. Improper disposal of used batteries may seriously pollute the environment. Please comply with local disposal regulations.
Troubleshooting We frequently update our user manuals at GOTRAX.com, and reserve the rights to update and change manuals online. Please contact our customer service team if you are experiencing problems or need more detailed information. They can be reached at GOTRAX.com.
Page 19
W W W . G O T R A X . C O M #RideGOTRAX...
Need help?
Do you have a question about the Pulse Basic and is the answer not in the manual?
Questions and answers