Advertisement
INSTALLATION MANUAL
9G09T
CCT
Adjustable
230V | E27 | 9W | Dimmable
C
FAQs
Q: How to investigate problems if i can not connect the smart bulb?
A.Please check if the bulb is powered on properly.
B.Check if the phone is connected to WiFi and if your bulb is connected to the same WiFi as your phone.
C.Ensure the WiFi can access to internet,and only 2.4Ghz WiFi is supported.
D.Check if the bulb is rapidly ashing(on 0.5s and o 0.5 s) Before you start step3.
E.Make sure the WiFi password enter in App is correct when adding device.
F.Please do not use bulb outside WiFi range and metal container where can block WIFI signals.
Q:How to reset the bulb?
A.If the bulb doesn't have installed. Turn on(<1s)->o (>2s)->on(<1s)->o (>2s)->on (Wait for 5s) and then the
bulb will rapidly ash (2 times per second).
B.If the bulb have installed.In the page "device details" click "remove device", after 5 seconds the bulb will ash.
Instructions
The product has two years warranty under the condition that all the operations are strictly followed as per the
instructions.
And the following situations are not covered for the warranty:
1.Any alterations cut or illegible handwriting on the purchase tags or product instructions.
2.Malfunction caused by damage,incorrect connection or misusage.
3.Adverse phenomena caused by extreme environment rather than the inherent causes of this product (e.g.
lighting, ood, re,etc)
4. The product shell has been opened or disassembled.
5. Improper use, maintenance and storage caused by non-conformity with product speci cations (such as
moisture and corrosion).
6.Product appearance deformation, damage or any other physical damage caused by external forces.
Warnings:
1.The bulb is limited to indoor use only, do not use in humid and high temperature environment.
2.Do not touch the product when it is working due to the potential high temperature.
3.Do not use the product in the con ned space of metal materials. otherwise it can not be connected.
RGB
116mm
Advertisement
