ONE 9G09T Installation Manual

INSTALLATION MANUAL
9G09T
CCT
Adjustable
230V | E27 | 9W | Dimmable
Before installing the smart bulb, make sure you have a router which can access to the internet successfully, the
WiFi router must switch to 2.4Ghz mode. Please turn on WiFi and Bluetooth on your phone or tablet.
Scan the QR code and download Smart Life App, install App and register an account.
A
There are three methods to connect.
Default mode:
How to make the light blink rapidly?
1.Power on the bulb(>10s)
2.Power o (>2s)->Turn on(<1s)->o (>2s)->on(<1s)->o (>2s)->on (Wait for 5s).
3.Then the bulb will rapidly ash (On and o twice per second).
4.If not,please try again, go on step 2 as long as the bulb is quickly ashing.
How to add the smart bulb in the app?
1.App installed devices connect to Wi-Fi and enable the bluetooth and location permissions.
2.When the bulb is in pairing status (quick ashing), click"+"on the top right corner of Smart Life App, tap in
order'Add Manually->Lighting->Light Source (BLE+Wi-Fi).
3.Make sure the bulb is quick ashing. Choose the local WiFi and enter WiFi password, click 'Next' , then add
the bulb accordingly.
4.You can rename the device as you want and control it on the App.
AP mode:
Set App to pairing status, please choose 'AP mode' on the top right corner.
Follow the prompts:
1.Power on bulb(>10s)
2.Power o (>2s)->Turn on(<1s)->o (>2s)->on(<1s)->o (>2s)->on, after the ash is quickly ashing (Light
on and o twice per second), then continue to, power o (>2s)->Turn on(<1s)->o
(>2s)->on(<1s)->o (>2s)--> on (Wait for 5s).
3.Then the light is slowly ashing (Light on and o once per second).
Bluetooth connection:
1.Make sure your mobile phone/tablet has connected to a 2.4Ghz WiFi router and the device's
bluetooth is enabled.
2.Make sure the bulb is ickering.
3.When you open the Smart Life App, the 'adding device window will pop up , add the device accordingly.
4.If the device adding window does not pop up, click the '+' on the top right corner of the App to add the
device.
RGB
116mm