Advertisement
TROUBLESHOOTING GUIDE
What often appears to be a malfunction is often due to user error in operation or connection.
When trouble occurs with your unit, please check the following before calling for service.
Power
cannot
be | 1. The backup fuse is blown.
1. After checking that no cords are
switched ON,
The fuse of the connected head
short-circuited,
replace
the
unit is blown.
blown fuse with a new one of
the specitied capacity.
2. Cannect the power connector.
2. The equalizer's power connec-
tor is not connected to the pow-
er supply.
The Fader controller is turned fully | Turn the Fader controller to op-
to front or rear.
timize the front/rear balance.
1. The speaker cord, system pow-
| 1. Conneci cords properly accord-
er, or pre-out connections are
ing to the instructions in the in-
not secure,
:
struction manual.
2. The
pre-fader
control
of the | 2. Set the fader of the head unit to
head unit is set to the minimum
the center position and check if
position.
sound is output.
Low frequencies are not | The Sub-woofer switch is set to the | Set the Sub-woofer switch to the
heard.
ON position.
OFF position,
Sound is not heard from
the front or rear speakers.
Sound is not output.
14 tens
Advertisement
