G20158 - G3 Ferrari G20158 User Manual

contact with food as the container, the lid, the rostrum and
the blade.
Caution: close the lid before turning on the unit. Unplug
the unit from the electrical outlet before touching any
attachments and/or accessory, especially the blade set.
Do not use the appliance running continuously for more
than 30 seconds, in then interval with at least 2 minutes of
rest. Never leave unattended while it is running.
Do not insert large pieces in the container, especially hard
food. It is advisable to pre-chop the food.
When mincing fruits, remove the pit and/or any tough
rind. Unplug the appliance from the electrical outlet
immediately after using and / or before touching any
accessory, especially the blades. If some food stops the
blades before removing it, unplug the unit from the
electrical outlet.
Do not insert food if it's too hot (maximum 60 C).
Not exceed the maximum capacity for ingredients as
indicated in the Operating section.
At the end of processing, wait for the blade to completely
stop before removing the food from the container. When
finished using the unit, wrap the power cord so as to
ensure a better cleaning, avoiding any risk of damage.
For cleaning, we recommend using warm water only,
limiting the use of detergents. In this case, rinse the part
profusely. Do not immerse the motor unit in water or
other liquids; clean it with a damp cloth.
Caution: blades are very sharp; pay attention not to cut
yourself while removing the attachment or during
cleaning operations. Bring knob on "0" (OFF) position
before inserting the plug in the socket.
DESCRIPTION G20158
1. Working and PULSE button
4. Lid of chopper
7. Lid of slicer
10. Reversible disk
2. Container slot
5. Rostrum with blades
8. Lid slot
11. Speed reducer
3. Transparent container
6. Main body
9. Food presser
10