Advertisement
Quick Links
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flycam Flowline
Starter
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
Flowline Starter with Edge V1 Stabilization Arm
(FLCM-FLN-EGV1)
A s s e m b l y M a n u a l
2mm Allen Key
All rights reserved.
statutes or in writing by the Publisher.
Edge V1 Arm
2 x Velcro
1
2 x Washers
2.5mm Allen Key
Bag Packing
Advertisement
Summary of Contents for Flycam FLCM-FLN-EGV1
- Page 1 Flowline Starter with Edge V1 Stabilization Arm (FLCM-FLN-EGV1) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 Flowline Starter with Edge Setup NOTE: It is recommended to attach the minimum required weight (3kg / 6.6lb) for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system. • Loosen the screw of the Camera Hook attached to the Flowline Support Arm using the Allen key.
- Page 3 • To detach the Flowline Support Rod pull it upwards. • Dissemble the Camera Hook and the Support Rod from the Vest. • To detach the extension from the Support Rod of the Vest, remove its screw using a screwdriver. •...
- Page 4 • Insert a screw in the Support rod and tighten it using the screwdriver. • Similarly, tighten the top screw using the screwdriver. • Loosen the knob of the Flowline Edge. • After loosening the knob, remove it and pull the rod of Flowline Edge to open it.
- Page 5 • After inserting the cord in the Edge, pull the cord from the side of the Rod. • Properly attach the Edge to the flowline vest. Feature: It attaches to your Flowline Body Worn Systems like Basic flowline hanger, master flowline hanger, and N series hanger (300N, 400N &...
- Page 6 • Attach the Camera Hook to the Cup. • Insert the screw into the Camera Hook and secure it properly using an Allen key. • The Flowline Edge is fully assembled with the Stabilization Arm. The versatile belt system molds to fit all body types. Capture Every Angle (180°...
- Page 7 Low/ High Angle Shots Adjust Camera Setup Position...
- Page 8 YOUR FLYCAM FLOWLINE STARTER WITH EDGE V1 STABILIZATION ARM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.