Assembling The Stand - Kawai PN Series Owner's Manual

ASSEMBLING THE STAND
Be sure that all parts are included before starting to assemble your unit.
PARTS PROVIDED
Side Panel (A)........ 2 pcs. Spring Washer (J) ..... 4 pcs.
Back Panel (B) ....... 1 pc. Round Nut (K) ....... 4 pcs.
Pedal Board (C) ...... I pc. Adjuster (L) ......... ] pc.
Toe Block (D) ........ 2 pcs.
Screw (E, extralong) .. 4pcs. (E) (F) (С) (Н) (К)
Screw (F, long) ....... 8 pes. =
Screw (G, middle). .... 3 pes. | |
Screw (H, short) ...... 4 pcs.
Washer (I)........... 4 pes.
1. Insert the round nuts (K) into the holes of
Side Panel (A) with keeping the nut's hole
vertical. Insert the screws (E) into the spring
washer and washer. Put (A) to Toe Block (D)
and fasten with four screws (E) from the
bottom.
2. Insert the adjuster (L) on Pedal Board (C).
(F) - Fasten (A) and (C) with four screws (F).
Bottom view
Ф (L)
(с) 9757