Advertisement
Installing the Jack Mount
1.
Secure the jack mount to the frame on the left of
the machine using the backing plate, 2 hex-head
bolts, and 2 locknuts
Note:
For ease of access, secure the inner set
of fasteners first before securing the outer set
of fasteners.
1. Jack mount
2. Locknut
2.
Torque the bolts to 19 to 25 N∙m (175 to 225
in-lb).
(Figure
1).
Figure 1
3. Backing plate
4. Hex-head bolt
Operation
Using the Jack Mount
WARNING
The machine could fall onto someone and
cause serious injury or death.
• Read and understand the Operator's
Manual before performing maintenance.
• Always shut off the engine, engage the
parking brake, and remove the key before
performing maintenance on the machine.
• Do not keep the machine raised on the jack
for extended periods of time.
• Always use a jack on a level surface.
• Ensure that the jack is secured properly to
the jack mount using a jack pin.
• Do not rely solely on the jack for support.
Use adequate jack stands or equivalent
support.
• Do not mount or dismount the mower while
the jack is raised.
• Before each use, ensure that the jack and
g467128
jack mount work properly and that there
are no signs of damage.
Note:
Use only a manufacturer-approved jack rated
at 907 kg (2,000 lb) or higher lift capacity with the
jack mount.
1.
Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
Note:
For electric models, move the
motion-control levers outward to the
position and engage the parking brake.
2.
Shut off the machine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Attach the jack to the jack mount with a jack pin
(Figure
2).
2
ARK
NEUTRAL
Advertisement
