VPixx Technologies VPX-ACC-5150 Assembly Instructions

Mri mirror

Advertisement

Overview

These assembly instructions will help you assemble your VPixx Technologies front surface mirror.
The front surface mirror is an MR safe product.
WARNINGS AND MARKINGS MUST BE OBSERVED! Before installing and using your front
surface mirror, familiarize yourself with the MR room safety symbols that are found on your
equipment. These are explained in the following table.
Symbol
MRI Mirror
Assembly Instructions
(P/N VPX-ACC-5150)
Table 1 MR room safety symbols
Name
Objects and components marked with the green MR safe icon
MR safe
present no danger for staff and equipment when in the MR
The yellow Conditionally MR safe icon indicates objects and
Conditionally
components that are MR safe in a limited fashion. Specified
MR safe
safety distances limit how close the object or component in
The red MR unsafe icon marks objects or components which are
MR unsafe
Description
room.
question may be from the magnet.
strictly prohibited from entering the MR room.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VPX-ACC-5150 and is the answer not in the manual?

Questions and answers

Summary of Contents for VPixx Technologies VPX-ACC-5150

  • Page 1 Assembly Instructions (P/N VPX-ACC-5150) Overview These assembly instructions will help you assemble your VPixx Technologies front surface mirror. The front surface mirror is an MR safe product. WARNINGS AND MARKINGS MUST BE OBSERVED! Before installing and using your front surface mirror, familiarize yourself with the MR room safety symbols that are found on your equipment.
  • Page 2 Front surface mirror Screen holder (32’’ aluminium profile) Support leg (40 ¾’’ aluminium profile with support brackets) Foot support (12’’ aluminium profile with support brackets) Rubber holder 4 mm Hex MRI safe Copyright © 2020 VPixx Technologies Inc. All Rights Reserved...
  • Page 3 Insert the first support leg into a foot support, ensuring that the support leg is in its correct upright position. Use the 4 mm Hex to secure it in place. Repeat for the second support leg and foot support. These two assemblies now form the two vertical supports. Copyright © 2020 VPixx Technologies Inc. All Rights Reserved...
  • Page 4 Add the front surface mirror to the support assembly. Simply slide it down into each of the vertical support grooves until it settles into the screen holder groove. WARNING! The mirror is very fragile Copyright © 2020 VPixx Technologies Inc. All Rights Reserved...
  • Page 5 From top to bottom, slide the rubber holder into each side. The rubber holder should be installed to the back of the front surface mirror in order to stabilize it in its position. Finally, install the cover cap on each support leg. Copyright © 2020 VPixx Technologies Inc. All Rights Reserved...

Table of Contents