Samsung 510N Service Manual page 11

3 Disassembly and Reassembly
these components.
3-1 Disassembly
Cautions: 1. Disconnect the monitor from the power source before disassembly.
3. R/Cover opening jig : BH81-00001A
Place monitor face down on cushioned table.
Remove 4 screws from grip on the stand and
remove the stand. Remove 2 screws from the
rear cover.
Insert the opening stand into the grooves at a
hole and press until it clicks and lift the rear
cover.
Remove 2 screws from the shield.
Disconnect function cable from the cover front
and lift up the panel. Remove 4 screws from
the panel shield. (Right / Left)
Lift up the panel shield and carefully remove
the silicon glue on the cables with a nipper.
A\Caution : Lamp wire may be easily
damaged. Please use caution when removing
the silicon.
MJ15AS*/MJ17AS*/MJ19AS*/
MJ15BS*/MJ17BS*/MJ19BS*
3-1