Related Manuals for Midea KJ350G-S1
Summary of Contents for Midea KJ350G-S1
- Page 1 OWNER’S MANUAL Air Purifier Model: KJ350G-S1 READ AND SAVE THESE INSTRUCTIONS Attention: Pictures in the IM are for reference only.
- Page 2 CAUTION Read Rules for Safe Operation and Instructions Carefully. WARNING 1. If the supply cord is damaged, it must be replaced by manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. 2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a...
- Page 3 7. Do not place other items on top of the appliance, and forbid sitting or standing on this appliance. 8. Please use the original filter provided by the factory. In case of other filters, the best results cannot be achieved. 9.
-
Page 4: Product Instruction
Product Instruction Attention The pictures contained in the Manual are for reference only, and please be subject to the physical product in the packing box. Component name Air outlet grille Display screen Operation panel Air inlet grille Pre-Filter HEPA Filter Host Protective bag... -
Page 5: Installation Instructions
Installation Instructions Installation steps Remove the air inlet grill Take out the Pre-Filter Press down and pull the U-shaped snap joint, and take out the Pre-Filter. Remove the protective film of Take out the HEPA filter the filter assembly Hold both sides of the HEPA filter with both hands, and take it out Install the Pre-Filter Install the HEPA filter... - Page 6 Instructions Control panel Sleep mode Light sensing The wind speed Automatic mode If PM2.5>50, make the wind slightly function buttons have low, Adjust the wind speed larger to ensure purification effect; medium and high automatically according If PM2.5<50, keep it in the mode of wind.
- Page 7 Test Run Attention • This appliance has the function of disassembling protection, so it cannot be started normally until all air inlet grilles are installed correctly. • In case of continuous electricity, enter the working mode before the standby state, after each power on. •...
-
Page 8: Cleaning And Maintenance
Cleaning and Maintenance Body cleaning Attention Be sure to turn it off before any maintenance, and cut off power. Host Wipe the body with a soft towel. Air inlet grille Open the air inlet grill, vacuum up dust with a vacuum cleaner or wipe it with a cloth. - Page 9 Cleaning of the Pre-Filter It is recommended to clean the Pre-Filter at least once every two weeks. The cleaning cycle can be based on the usage environment and time, seriously polluted environment should be cleaned frequently. Unplug the appliance, and Vacuum the dust or wipe it take out the Pre-Filter.
- Page 10 Replacement of the filter components Filter model: When the filter replacement FC-35S1A (include 1) light is on, it reminds that the HEPA filter should be replaced. If it is not replaced in time, the prompt will appear every startup. Long press timing button for 3s, Replace a new filter reset the HEPA filter.
Need help?
Do you have a question about the KJ350G-S1 and is the answer not in the manual?
Questions and answers