Related Manuals for Hoval TempTronic MTC
Summary of Contents for Hoval TempTronic MTC
- Page 1 TempTronic MTC Operating Instructions TempTronic MTC Room temperature controller for TopVent GV units ® 4 220 655-en-00...
-
Page 2: Table Of Contents
TempTronic MTC Content 1 Use 1.1 Intended use ..............3 1.2 User group ..............3 2 Basic principles 2.1 Operating elements ............4 2.2 Language ............... 5 2.3 Time and date ..............5 2.4 Display ................5 2.5 Keyboard locking ............6 2.6 Reset ................ -
Page 3: Use
TempTronic MTC 1 Use 1.1 Intended use The TempTronic MTC is a programmable room temperature controller for up to 8 TopVent GV units. It fulfils the following functions: ® ■ Regulation of the room temperature with setting option for 3 temperature setpoints (0…30 °C) -
Page 4: Basic Principles
TempTronic MTC Basic principles 2 Basic principles 2.1 Operating elements The device is operated via a 4-line display and 4 keys: 14:08 20°C Fig. 1: TempTronic MTC Function ■ View information Access and exit menu ■ Confirm values and settings ■ Increase values ■... -
Page 5: Language
TempTronic MTC Basic principles 2.2 Language Menu → Settings → Language Language Select the desired language: Nederlands ■ Nederlands ■ Polski →Deutsch ■ Deutsch ■ Lietuviu English ■ English ■ Cesky ■ Francais ■ Dansk ■ Italiano ■ Russkij Operating example – How to navigate through the menu: ■... -
Page 6: Keyboard Locking
TempTronic MTC Basic principles 2.5 Keyboard locking Keyboard locking is used to protect the controller against unauthorised changing of the settings. The following security levels can be selected: ■ On (keyboard locked) ■ Off (keyboard unlocked) ■ On excl. overtime (access to the overtime program only, see section 4.1) Menu →... -
Page 7: Programming
TempTronic MTC Programming 3 Programming 3.1 Temperature setpoints In automatic mode, the controller works with 3 different setpoints for the room temperature, each of which can be set from 0...30 °C: 'Day', 'Night' and 'Frost'. The period for their validity can be freely defined in the clock program. -
Page 8: Heating Program
TempTronic MTC Programming 3.3 Heating program In the heating program, you can choose between automatic operation according to the clock program or continuous operation with a specific temperature setpoint: ■ Clock program: – The controller switches the setpoints as defined in the clock program. -
Page 9: Optimisation
TempTronic MTC Manual operation 3.5 Optimisation You can set the controller so that it starts heating up in automatic mode before the entered switching time. Heat-up is optimised so that the desired temperature is reached at the actual switching time. -
Page 10: Calibration
TempTronic MTC Calibration 5 Calibration The measured value of the integrated temperature sensor may deviate from the actual temperature under unfavourable circumstances (e.g. due to sunlight or installation on an outside wall). You can compensate for this temperature differ- ence using the calibration function. - Page 11 TempTronic MTC External switching 7 External switching Optionally, an external signal can be connected to the controller (for connection, see wiring diagram). This way, the units can be controlled via a door contact or an external time switch, for example. Define the desired operating principle in the installer menu: ■...
- Page 12 Error A1 (1) this is indicated accordingly: Press IGNIT ERROR →Reset heater Caution Do not carry out a reset again and again if faults occur frequently with a unit. Have the system checked by Hoval customer service. 4 220 655-en-00...
- Page 13 TempTronic MTC Information menu 9 Information menu The information menu displays additional information about the connected units. ■ Press and hold the key for 5 seconds, to access the information menu. ■ Switch between several connected units with ■ Press again, to view more information about the selected unit.
- Page 14 Hysteresis (has an influence on the temperature control) – 0.3 °C ■ I Factor (has an influence on the temperature control) – I 5 min. – Only change this value after consulting Hoval customer service. ■ DeltaT2 control (not used) ■ Remote sensor –...
- Page 15 ■ Carefully prise the print plate out of the holder. ■ Replace the battery. ■ Reassemble the controller. ■ Dispose of the battery in accordance with local regulations. Fig. 2: Opening TempTronic MTC 4 220 655-en-00...
- Page 16 TempTronic MTC Contact Contact International Hoval Aktiengesellschaft 9490 Vaduz Liechtenstein Tel. +423 399 24 00 info.klimatechnik@hoval.com www.hoval.com United Kingdom Hoval Ltd. Northgate, Newark Notts NG24 1JN Tel. 01636 672711 hoval@hoval.co.uk www.hoval.co.uk 4 220 655-en-00...
Need help?
Do you have a question about the TempTronic MTC and is the answer not in the manual?
Questions and answers