Advertisement
10
NORMAL
4 BAR
8 BAR
ON
RHYTHM
_
BREAK
_
VARIATION
VARIATION
RHYTHM VARIATION
These are used tb add variation to the rhythm patterns selected by the
rhythm selectors.
The selector switch selection of the rhythm variation has
NORMAL, 4 BAR and 8 BAR variation buttons.
When the 4 BAR button is pushed, the rhythm pattern is automatically added
every 4 bars. The same effect is produced every 8 bars when the 8 BAR
button is pushed.
When the NORMAL
button is pushed, the selected rhythm returns to the
normal Auto Rhythm without switching to the rhythm variation pattern.
BREAK VARIATION s
This is used when an accent is desired on the rhythm. The moment the Break
Variation button is pushed, the green light lights up and the Break Variation
rhythm start.
They both stay ON till the end of the bar in which the button
is released.
At the termination of the Break Variation rhythm, the original rhythm takes
over automatically.
Seven different kinds of Break Variation patterns and two kinds of INTRO
patterns are provided.
And each of them is assigned to the original rhythms
as follows.
Kind of
Break VAR.
Original Rhythm
INTRO 1
All 4/4 time family rhythms
Break VAR. 1 | MARCH, TANGO
Break VAR. 2 | JAZZ ROCK, DISCO, 16 BEAT
Break VAR. 3 | RHUMBA, MAMBO, SAMBA, LATIN ROCK
Break VAR. 4 | BOSSANOVA 1, BOSSANOVA 2
INTRO 2
All 3/4 time family rhythms
Break VAR. 5| WALTZ 1, WALTZ 2
INTRO 1
All 12/8 time family rhythms
Break VAR. 6 | BALLAD
Break VAR. 7 | SLOW ROCK
Note:
While the Break Variation or INTRO
rhythm is ON, Auto
Bass/Chord, Auto
Arpeggio and Rhythmic Wow don't work,
* Operation of INTRO pattern
Push the Break ON button while the. rhythm is at a stop. (The button ON
causes the light of the Break ON button to light up showing that the INTRO
pattern ís at the stand-by.)
Then flick the START switch ON, and the INTRO pattern in accordance with
the original rhythm (4/4, 3/4 or 12/8) is played for the first two bars. From
the third bar on, however, the rhythm is switched to the original one auto-
matically.
Note:
1. If the SYNCHRO START switch has been ON before the Break ON button
is pushed, the INTRO pattern will not work.
2. Flicking the SYNCHRO START switch ON while the INTRO pattern is play-
' — ed cancels this INTRO pattern at the very moment.
3. After the rhythm was stopped with the foot switch, if the Break ON button
is pushed and the rhythm is started again with the foot switch, the INTRO
pattern will not work. Instead, the Break VAR. rhythm is played for the first
bar and the original rhythm takes over from the second bar.
4. While the rhythm is ata stop, the INTRO rhythm is canceled by pushing the
Break ON button again and the lamp also turns off,
Advertisement
