Advertisement
CONNECTION
Match the color when connecting audio connection plugs and
terminals to white (left audio) and red (right audio) cords.
—O>
1 AUDIO It
2aupio IN
AUDIO OUT
3/ TAPE
AUDIO IN
Before using the unite, set to line
voltage. Detailed information can be
found on page 3
if the INPUT SELECTOR button is set
to TAPE and a cassette tape is played,
the sound
is output from the OUT
terminal of AUDIO OUT.
To record
cassette tape sound, connect the
AUDIO
terminal or audio amplifier
recording terminal.
Cassette tape deck
Stereo amplifier
Notes on connection
® Turn off each equipment power before connection.
@ Fully insert the plug. Incomplete connection may cause noise.
@ Hold the plug when disconnecting; do not pull the cord.
@ When more than one piece of equipment is connected, turn
off the equipment not used to prevent mutual interference.
4
<MRB1019>
En
Advertisement
