Supplied Items; Items Not Supplied - Microfluidics Microfluidizer LM20 User Manual

!
WARNING: THIS EQUIPEMNT CONTAINS A NITROGEN CHARGED HYDRAULIC ACCUMULATOR. IT MUST
BE DISCHARGED BEFORE SHIPPING AND BEFORE SERVICING ANY HYDRAULIC COMPONENT.
!
WARNING: DO NOT RESTRICT OR DEAD-END PIPING WITH BODY PARTS. BODILY INJURY COULD OCCUR.
!
CAUTION: If the Microfluidizer™ Processor is not going to be used for more than one month, then the
accumulator nitrogen gas must be discharged and recharged prior to the next use.
!
CAUTION: This equipment is shipped WITHOUT hydraulic oil in the reservoir. Users MUST fill the
reservoir with hydraulic fluid that has been filtered through a 10 micron filter before using the equipment
(oil is included in tool kit). DO NOT start the motor without ensuring that a sufficient level of hydraulic oil
is in the tank. Damage to the pump could result. During oil fill, eye protection must be worn.
!
CAUTION: The accumulator must be charged before the machine can be operated. See section on
accumulator charging. During charging, eye protection must be worn.
!
CAUTION: Do not obstruct the air vents. Damage to the hydraulic components could result.

3.2 Supplied Items

The LM20 Microfluidizer
High-Pressure Intensifier Pump, single acting.
•
• Interaction Chamber design type to fit your process.
• 300mL glass inlet reservoir.
Power cord to connect the processor to power utilities.
•
Tool Kit with all special tools necessary to service the LM20.
•
• Spare Parts Kit with basic parts needed to service the LM20.
• Drawings of components for ease of ordering replacement parts.

3.3 Items Not Supplied

The following items are NOT supplied with the unit:
• Power Cord Plug. The end user is responsible for installing a plug to suit local electrical regulations
on the end of the LM20's power cord.
• Nitrogen Charging Kit. The nitrogen charging kit is available from your local Microfluidics
representative with the correct local nitrogen adapter. Kits are available for purchase from
Microfluidics, contact Microfluidics Customer Service.
MANUAL.LM20
processor comes complete with:
TM
Revision C January 2023 Page 13 of 52