Table of Contents
Advertisement
• Do not use the One Connect
in
the upside-down or upright position.
• When connecting the One
Invisible
Connection, use a Bending
Cover,
which prevents
the cable
of the One
Invisible Connection from being bent at a 90 degree angle, to bend
the
cable.
Failure
to
do so may cause
damage to the cable.
• When connecting the One Invisible Connection, pay attention
to
the shapes and sizes of
its connectors
so
that they are connected
correctly.
Failure to do
so
may cause product malfunction.
• When connecting the One Invisible Connection, be careful not to twist the cable of the One Invisible
Connection.
Failure to do so may cause performance degradation of the TV or damage to the cable.
• When arranging the remaining cable, refer to the figure on the previous page for the correct
arrangement.
• Take care not to subject the cable to any of the actions below. The One Invisible Connection contains a
power circuit. You could damage
the
cable and subject yourself to an electric
shock.
• Handle the One Connect box carefully. It is heavy.
~
Bending
Twisting
Pulling
Pressing on
Electric shock
CLASS
1
LASER PRODUCT (One Invisible Connection)
• Caution - Invisible laser radiation when
open.
Do not stare into beam.
-
Do not bend the One Invisible Connection cable
excessively.
Do not cut the cable.
-
Do not place heavy objects on the
cable.
-
Do not disassemble either of the cable connectors.
• Caution - Use of controls, adjustments, or the performance of procedures otherthan those specified
herein may result in hazardous
radiation
exposure.
3. Connect your peripherals (antenna, cable box, Blu-ray player, etc.) to the One Connect
box.
See the Accessory Kit
Guide for details.
English
-8
Advertisement
Table of Contents
