Table of Contents
Advertisement
Audio Adjustments
Audio Norm
This feature is used to reset BASS, TREBLE, and
BALANCE back to a factory preset level.
NOTE: Bass and Treble are automatically set when Al
Sound is ON.
1.
Press
2.
Press
or^^ and
or
to highlight the Audio
Icon.
3.
Press
to display the Audio Adjustment Menu.
5.
Press
or
to select SET to normalize Bass,
Treble, and Balance.
6.
Press (^3) twice to exit menus.
Bass, Treble, and Balance
Before setting Bass or Treble select the desired mode of
Al Sound (ON or OFF). Bass and Treble Adjustments may
require readjustment when changing between Al Sound
ON or OFF.
1.
Press (^3.
2.
Press
or^^ and ^ or
to highlight the Audio
Icon.
3.
Press ^3) to display the Audio Adjustment Menu.
BALANCE.
5.
Press ^ or ^ to adjust for desired audio response.
6.
Press (^3 twice to exit menus.
Helpful Hints:
_
BASS - To increase or decrease the Bass response.
TREBLE - To increase or decrease the Treble response.
BALANCE - To emphasize the LEFT/RIGHT speaker
volume.
Mode (Stereo/SAP/Mono)
When Audio is broadcast in Stereo or SAP, an On-Screen
display will appear on initial 'Turn On" and "Channel
Change". The available choices will be Indicated in red.
1.
Press (^).
2.
Press
or^^ and
or ^ to highlight the Audio
Icon.
3.
Press
to display the Audio Adjustment Menu.
5.
Press ^ or ^ to select STEREO, SAP {Second
Audio Programming), or MONO. The selected mode
will be highlighted.
6.
Press (^3 twice to exit menus.
Helpful Hints:
_
STEREO - Two channel Audio reception.
SAP - Second Audio Programming (such as bilingual
audio, weather reports, etc.).
MONO - Use when stereo signal is weak.
-
16
-
Advertisement
Table of Contents
