Advertisement
https://www.ecdesigns.nl
Firmware update
To update the PowerDAC-BX firmware you need to download the STM32CubeProgrammer.
You need to ACCEPT Licence Agreement (click button) and on the next screen you need to fill-in your E-mail
address to be able to download STM Cube programmer (you need to use confirm via email sent to you before
you can download the STM Cube-programmer).
The email sent to you contains the Download now button to start the download.
Goto link below to download the STM Cube programmer (Win/Lin/Mac):
https://www.st.com/en/development-tools/stm32cubeprog.html#get-software
Download and install STM32CubeProgrammer
Disconnect the mains power cable from the PowerDAC-BX !
Use tweezers to set jumpers to PROGRAM configuration (see Jumper settings on previous page).
Download and unzip latest pdrs-firmware.zip
Now connect a USB cable from the PowerDAC-BX to your computer and start the STM32CubeProgrammer.
9 17
/
© 1990-2023 - All Rights Reserved - ECdesigns
Advertisement
