Advertisement
UT96
The UT96 is an optional USB to Toslink converter that
can be used with the PowerDAC-BX.
It supports USB full-speed:
44.1kHz / 48kHz / 88.2kHz / 96kHz
Use standard USB cable to connect to PC/Host/Streamer.
UT192 (Optical + ElectroTos output)
The UT192 is an optional high-speed USB to Toslink converter that
can be used with the PowerDAC-BX or other Toslink DACs.
It supports USB high-speed:
44.1kHz / 48kHz / 88.2kHz / 96kHz / 176.4kHz / 192kHz
The UT192 is based on the XMOS processor.
Use high-speed USB cable to connect to PC/Host/Streamer.
The UT192 has both optical Toslink output + ElectroTos output.
We found that using highest sample rates some optical Toslink cables would not work.
Depending on the quality of the Toslink cable, optical reflections can prevent reliable (bit-perfect) output !
Therefore we also fitted the UT192 with an ElectroTos output.
ElectroTos (using standard S/PDIF output) uses an electrical cable with a LED on the other end.
This eliminates optical reflections but can still use standard Toslink input.
So the UT192 can also be used with other DACs that use Toslink.
A 1 mtr. ElectroTos cable ET100 is included with UT192.
An 2 mtr. ElectroTos cable ET200 option is also available in webshop.
An 4 mtr. ElectroTos cable ET400 option is also available in webshop.
12 17
/
https://www.ecdesigns.nl
© 1990-2023 - All Rights Reserved - ECdesigns
Advertisement
