Download Print this page

Kenwood SS-992 Instruction Manual page 12

Av surround processor
Hide thumbs Also See for SS-992:

Advertisement

Operating instructions
The Dolby 3 Stereo mode uses an additional center
speaker to improve the positioning
of words,
etc.,
when playing video software such as a movie in your
home.
@ 00 3 STEREO adjustment
Preparations : Complete the "Preparations of operation A or
B" on page 6 or 7 before proceeding to the following.
1 Set the D0 3 STEREO mode.
co
t)
HALL
BYPASS
PROLOGIC
3 STERED
THEATER.
Main unit
Remote
control unit
provided with
amplifier
Lights up
3 STEREO
Every time the key is pressed, the surround mode is
switched.
DOLBY
SURROUND
SURROUND
#3 STEREO
DOLBY
3 STEREO —
HALL — THEATER
2 Select the center mode.
CENTER MODE
0
@ Set the center mode to NORMAL if using a small center
speaker, or set to WIDEBAND if using a medium-sized or
larger speaker.
Every time the key is pressed, the
center mode is switched.
NORMAL
~—>
WIDEBAND
TEST
Turn on the test tone.
t vere
Adjust the center speaker volume.
@ Press the MODE key.
al
3
ovesr wage
\
Speaker
/
@ Ever time the key is pressed, the speaker generating the
noisy test tone is changed. (Holding the key depressed
moves the test tone automatically every 2 seconds.)
@ Adjust the volume.
CENTER
LEVEL
CICI
@ Repeat steps © and @, and adjust so
that the level of the center speaker is
equal to that of the left and right speak-
ers.
TEST
ON/OFF
MOQOE
5 Stop generating the test tone.
Press the TEST TONE ON/OFF key.
12 ss-992 n)
POWER switch
ae
et a sa
VOLUME CONTROL
CENTER MODE key
00 3 STEREO key
BYPASS key
TEST TONE keys
{ON/OFF,MODE)
@ 00 3 STEREO playback
Main unit
Lights up
3 STEREO
Remote control
unit provided with
amplifier
[MoDE, SURROUND
£3 STEREO
Every time the key is pressed, the surround
mode is switched.
DOLBY
DOLBY
—>
THEATER
SURROUND
3sTeREO
ALL
sah :
CeNTEA MODE
2 Check the center mode.
e@ Normally, the last mode used is held in memory.
If it is
different from the required mode, select the mode which
was used in step 2 of the "00 3 STEREO adjustment".
3 Play a stereo software program
or a Dolby
surround program.
4 Adjust the volume.
VOLUME
CONTROL
rot hm,
Adjusts the overall volume.
To return to normal stereo playback
oo
oo
RALLY
BYPASS
ROLOGE
STEREO
THEATER
Goes off
Tiras

Advertisement

loading
Need help?

Need help?

Do you have a question about the SS-992 and is the answer not in the manual?