Table of Contents
Advertisement
6. Use an object such as a straightened
paper clip to pull the magnet's
mounting bracket away from the
magnet.
7. Use the two remaining screws to
mount the mounting bracket.
8. Snap the magnet onto the mounting
bracket. Make sure the magnet's arrow
points toward one of the engraved
lines on either side of the alarm.
Using Adhesive Tape
1. Make sure surfaces are free of dust, oil
and other substances.
2. Peel the backing from one side of each
of the supplied adhesive strips, then
attach them to the back of the alarm
and the magnet.
Preparation
9
Advertisement
Table of Contents
