Advertisement
LD/cCDV/CD
need
[ To check the program contents
ee
During program
playback or in stop mode, press PGM
to
display the program contents on the monitor screen.
When
PGM is pressed again, the program contents disappear
| To modify the program contents
To erase a programmed chapter/track or pause
1, Press PGM.
2. Press SKIP ke or Pi to place the cursor (>) on the left
side of the chapter/track or pause to be erased
3. Press CLEAR
4. Press PGM to complete programming.
Pressing » also
completes programming and starts program playback with
the new program contents.
To change a programmed
chapter/track or pause to a
new
one
1. Press PGM
2. Press SKIP He oF BH to place the cursor ( » } on the left
side of the chapter/track or pause to be changed.
3. Enter the new disc side with the DISC SIDE A/B buttons
and/or enter the new chapter/track number with the digit
buttons
Press PAUSE If to enter 4 pause.
4. Press PGM to compiete programming. Pressing » also
completes programming and starts program playback with
the new program contents
e
Programmed chapter/track being played cannot be erased
or changed
e@ Programmed pause being engaged cannot be erased or
changed.
CAUTION
©
1 SCAN
me
is heic depressed
during Program Playback, the
playback position will move to another chapter/ireck, but whe:
mr
Is released, the next chapter/track in the program
will be
played.
If <4 is held depressed, the pleyback position re
to the beginning of the current chapter or track being played,
Dut it will not go beyond it to a previous chapter or track in the
program
39
<VRB1062>
Advertisement
