SPROUT Magnetic Wireless Charger Manual

Product Overview

1. Magnetic wireless charging output
2. USB-C power input
3. Power source (not included)

What's in the Box?

For optimum performance and safety, please read instructions carefully before usage.

Please keep this manual for future reference.

Ix Magnetic Wireless Charger
Ix Product Manual

Quick Start Guide

Using your Magnetic Wireless Charger
This accessory will charge all devices compatible with Qi wireless charging. Note that to secure your device in place using magnetic wireless charging technology, your device must feature MagSafe Technology.

To use your wireless charger:

1. Connect the USB-C power input to a power source*
2. Align your device's MagSafe ring to the wireless charging output and your device will indicate when it begins charging.
3. To charge a device that does not have a MagSafe ring, place your device down on the charging pad. Align the device to the centre of the wireless charging pad for best charge. Alignment may vary by device. Your device will indicate when it begins charging.
4. To disconnect, gently pull the charger and device apart.
   
   --
   *Power source options include a USB connection such as a Sprout AC power adapter, a Sprout car charger or computer/notebook USB connection.

Note:

• If charging while phone is in a case, the charging speed may be impacted. This may result in intermittent or discontinued charging.
• Cases with a thickness of more than 5mm should be removed prior to charging.
• Cases containing any metal or magnets that are not compatible with MagSafe should be removed.

Specifications

• Unit Size: 56 x 56 x 147.77 mm (L x W x H)
• Unit Weight: 90g
• Input: 9V2A, 12V 1.6A
• Output: 5w/7.5w/15w
• Total Output: 15W (Max)
• Operating Temperature: 0-40 ⁰C

Important Safety Info

Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion.

• Do not use the Magnetic Wireless Charger near an open fire, heat source or excessive heat.
• Do not disassemble this device or attempt to modify it in any manner.
• Do not put metal objects or magnets that are not MagSafe compatible between the mobile device and the wireless charging surface.
• All products have gone through thorough quality assurance inspections. If you find that your device is excessively hot, is emitting odour, is deformed, abraded, cut or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Sprout.
  

Consumer Guarantee

For warranty and technical support please visit www.sproutinc.com.au or contact us:
275 George Street, Brisbane, 4000
07 3624 6666
sproutenquiries@sproutinc.com.au

Documents / Resources

References

• Home Page - Sprout Accessories Online

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download SPROUT Magnetic Wireless Charger Manual