SPROUT Magnetic - 2-in-1 Wireless Charging Stand Manual

Product Overview

1. Power adaptor
2. Power adaptor input
3. LED charging indicator
4. Wireless charging output
5. Magnetic wireless charging output

What's in the Box?

For optimum performance and safety, please read instructions carefully before usage.

Please keep this manual for future reference.

1x Magnetic 2-in-1 Wireless Charging Stand
1x 30W power adaptor
1x Product manual

Quick Start Guide

Using your Magnetic 2-in-1 Wireless Charging Stand

The Sprout Magnetic 2-in-1 Wireless Charging Stand must be used with the 30W Power Adaptor supplied in the box. Do not use an alternate power source.

The wireless charging output will charge all devices compatible with Qi wireless charging. Note that to secure your device using the magnetic wireless charging output, your device must feature MagSafe Technology.

To use your wireless charger

1. Connect the 30W power adaptor to the 'power adaptor input' and plug into a power point.
2. To use the wireless charging output, place your device down on the charging pad. Align the device to the centre of the wireless charging pad for best charge. Alignment may vary by device.
3. To use the magnetic wireless charging output, first ensure your device features MagSafe technology. Align the device's MagSafe ring to the wireless charging output and your device will indicate when it begins charging.

Note:

• If charging while phone is in a case, the charging speed may be impacted. This may even result in intermittent or discontinued charging.
• Cases with a thickness of more than 5mm should be removed prior to charging.
• Cases containing any metal or magnets that are not compatible with MagSafe should be removed.
• When used together, the wireless charging output is 20W total.

The Indicator Light

• Red and green lights will flash alternately when charging pad is first connected to power
• The red light will stay illuminated when the charging pad begins to charge your device
• For Android, the light will turn green when the device is fully charged, and charging will stop
• For Apple, the light will remain red and continue even when your device is fully charged
• The red and green light will flash continuously and stop charging if a foreign body is on the charging pad

Specifications

• Unit Size: 93.83 x 86.4 x 147.77 mm (L x W x H)
• Unit Weight: 178g
• Input: 15V 2A
• Magnetic Wireless Output: 7.5W/15W
• Wireless Output: 5W/10W
• Total Output: 20W (Max)
• Operating Temperature: 0-40°C

Important Safety Info

Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion.

• Do not use the Magnetic 2-in-1 Wireless Charging Stand near an open fire, heat source or excessive heat.
• Do not attempt to power this device using any method, apparatus, or connection other than the device's power adaptor. For questions or instructions on how to power the device refer to the illustrations in this user manual.
• Do not disassemble this device or attempt to modify it in any manner.
• Do not put metal objects or magnets that are not MagSafe compatible between the mobile device and the wireless charging surface.
• All products have gone through a thorough quality assurance inspections. If you find that your device is excessively hot, is emitting odor, is deformed, abraded, cut or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Sprout.
  

Consumer Guarantee

For warranty and technical support please visit www.sproutinc.com.au or contact us:
275 George Street, Brisbane, 4000 E sproutenquiries@sproutinc.com.au

Documents / Resources

References

• Home Page - Sprout Accessories Online

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download SPROUT Magnetic - 2-in-1 Wireless Charging Stand Manual