Advertisement
USING NAME(NAME CHAN
M@ What does Copy do?
1. Select EDIT with the MODE switch.
W What does the name change and register
The information memorized
in the keys of any of the
LEARY
function
do?
blocks, A to D, can be copied as a block into another
i
function. For example, AUDIO function C block can be
copied into VIDEO function C block etc.
2
RENT
This function lets you change the letters for the function,
block and LCD keys displayed on the LCD, and alsa lets
you register a new name.
2. Press the CPY key.
SELECT
e0IT
ramet es 3
(ey Ti 9
plat
All the blocks, A to D, are
displayed for you to select
one to copy.
3. Select the block you want to copy, and press the
relevant LCD key.
4. When FROM is displayed on the LCD, select the
function you want to copy from the seven available,
and press the LCD key.
{[AUDIO, VIDEO, FREE (A to E)}
* Even in the same A block, the component you can
operate differs depending on the function
5. When TO is displayed on the LCD, select the function
to be copied to from the remaining six, and press the
LCD key.
¢ If FULL is displayed, the memory is full and there
is no room left for copying ta take place.
* Every time you press the CAN (Cancel) key, it takes
you back one step in the procedure.
6. Return the MODE switch to the USE position.
24
>
oy
a
<ARD1011>
Ht
En
<a
|
~
] ics
Advertisement
