Pioneer PD-T507 Service Manual page 2

2. REMOVING AND MOUNTING OF EACH BLOCK
@ REMOVAL OF TRAY | AND TRAY II
1. Open the tray I.
2. Insert the flat blade screwdriver into the slit in the left of
tray I. Pull out the tray I by pushing the screwdriver.
Screwdriver
Slit position of tray |
* When remove the tray Il, open it first, insert the flat blade
screwdriver into the slit in the right of tray Il, and pull out the
tray by pushing the screwdriver.
Screwdriver
Gear Il Slit position of tray Il
Fig. 1
O MOUNTING OF TRAY |
1. Set the disc II to the clamp position and open the tray I.
2. Align the Ist tooth of tray I to ungrooved portion of gear I,
and insert the tray I.
+ mark ik
Ungrooved portion :
+ mark ae
1st tooth
Fig. 2
@ MOUNTING OF TRAY II
1. Set the disc I to the clamp position and open the tray II.
2. Align the Ist tooth of tray II to [] marked position of gear
II, and insert the tray II.
Align horizontally to [] mark.
1st tooth
Fig. 3