Advertisement
138681 Rev 1 (12/21)
Cleaning
When cleaning, use clean tap water and a mild dish detergent
soap. Avoid spraying water on any attached electronic
accessories. Consider covering items with a clean plastic bag.
Use a rubber band or masking tape to hold the bag in place
temporarily.
NOTICE
Do not power wash or dry with compressed air. This will force
contaminants into the fork where they will promote corrosion,
immediately damage the fork, or result in accelerated wear.
Do not use abrasive or harsh chemical cleaners /solvents
which can damage the finish or attack and destroy both the
outside and internal fork parts.
Replacement Parts
Part Number
Description
K83012
HeadShok TA Bolt 110x15 137mm
M15x1.5P
HeadShok Boot+Garter Springs 1.5
K53052
K53022
HeadShok Boot+Garter Springs 1.8
K54012
HeadShok Cable Grommets Guides
K52002
HeadShok Damper
Warranty Information
Different elements of this product are subject to the terms of
the Cannondale Limited Warranty. For more information, go
to the support area at www.cannondale.com.
NOTICE
Unauthorized service, maintenance, or repair parts can result
in serious damage and void your warranty.
Contacting Cannondale
Go to
www.cannondale.com
region.
cannondale.com
for contact information for your
Important Safety Information
WARNING
INTENDED USE: ASTM Condition 2, General Purpose Riding.
Bikes designed for riding Condition 1, plus smooth gravel
roads and improved trails with moderate grades where the
tires do not lose ground contact. For paved roads, gravel or dirt
roads that are in good condition, and bike paths.
Please read your Cannondale Bicycle Owner's Manual for more
information about Intended Use and Conditions 1-5.
NOT INTENDED: This fork is not for used for aggressive riding,
jumping or stunt riding. This fork must not be used on any
tandem bicycles or on electric or engine-driven motorcycles.
DO NOT MODIFY THE FORK. Do not attempt to alter or to
modify (e.g., drill, cut, weld, sand, or repaint).
HAVE ALL WORK PERFORMED BY A QUALIFIED
PROFESSIONAL BICYCLE MECHANIC. Do not attempt to
service or to repair the fork yourself. This owner's manual does
not include information needed to install, to remove, or to
disassemble/reassemble the fork. This manual only contains
information for using the fork when mounted on the bicycle.
PERIODIC INSPECTION REQUIRED: The fork must be
periodically inspected for damage as part of your routine
bicycle maintenance. Consult with a qualified professional
bicycle mechanic to help you develop a complete maintenance
program. Frequent checks are necessary to identify the
problems that can lead to an accident.
DO NOT RIDE ON A DAMAGED FORK. Stop riding a damaged
fork immediately. Follow the fork maintenance schedule of this
supplement.
MAKE SURE ALL REQUIRED BICYCLE LIGHTING AND
REFLECTORS ARE PRESENT AND IN WORKING CONDITION.
RACKS AND OTHER MOUNTED ACCESSORIES
This fork has mounting locations to support compatible
accessories. It is your responsibility to make sure any proposed
accessory attached to the fork is safely compatible with the
fork and with the bicycle. You assume all risk for the use and
safety of any attached accessories.
USE A TORQUE WRENCH: Apply thread lock and grease
as directed. Do not exceed the torque specified for any
component including handlebar, steerer, or any adjusting
hardware.
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IN
AN ACCIDENT IF YOU IGNORE THESE WARNINGS.
4 of 4
Advertisement
