Advertisement
in case of difficulty
Symptom
Possible cause
Remedy
Even
when
the
POWER
switch
is
turned ON the power is not supplied.
The power plug is not properly fitted.
Reconnect
the power
plug properly
into the AC outlet.
When a disc is loaded, it does not
start play.
1. Disc is loaded labei side upward.
2. Disc is dirty.
3. Optical system collects dew.
1. Reverse the disc.
2. Clean.
3. Keep the unit warm for an hour.
No sound.
Loose connection
Connect the connection cord tightly.
Sound skipped.
1. Disc is very dirty.
2. Disc is greatly damaged.
1. Clean.
2. Replace the disc with the new one.
3. Move the unit to a place where no
vibration is transmitted to the set.
Disc is dirty or damaged.
Clean the disc or replace it with the
new one.
Tray does
not open
even
after the
OPEN/CLOSE (4) key is pressed.
Specifications
Number of channels ..
Frequency response
Dynamic range ....
Signal to noise ratio .
Total harmonic distortion ..
Channel separation
Wow & flutter .......
Line output level/impedance
Headphones output level/impedance .
Playing speed ..
Quantization
Sampling frequency .
Power consumptions
.
Dimensions .................
Note:
improper insertion of a power plug.
. 2 channels
More than 92 dB
. Unmeasurable limit
. 1.6 V/3.3 kohms
. 31 mW/32 ohms
44.1 kHz
15 W
H: 90 mm (3-9/16")
D: 262 mm (10-5/16")
3.8 kg (8.36 Ib)
"20 Hz~20 kHz, + 1 dB
More than 92 dB at 1 kHz
W: 420 mm (16-9/16")
Insert the power plug tightly into the
AC outlet.
Less than 0.007% at 1 kHz
More than 88 dB at 1 kHz
. 1.2-1.4 m/sec {constant linear velocity)
. 16 bits linear 1 channel
Advertisement
