IBM 3290 T Installation, Setup, Operations, And Problem Determination Manual page 20

Symptom Probable Cause Action
634 Unable to write to diskette 1. Check that the correct
file diskette is in the control
unit. Press reset and retry
635
Diskette not ready
the operation.
2. If the problem still exists.
follow the local procedures
for reporting problems
with the control unit.
636 Diskette file locked (File is 1.
Press reset and wait until
being used by another the other operator is
operator.) finished before trying
again.
637
Diskette file overflow 1. Press reset and try again.
2. If the problem still exists.
638
Not able to read the diskette
follow the local procedures
file
for reporting problems
with the control unit.
639 Diskette file not locked
640 Wrong diskette in control 1. Check that the correct
unit diskette is in the control
unit. Press reset and retry
the operation.
2. If the problem still exists.
follow the local procedures
for reporting a problem
with the control unit.
641 Error queue overflow 1.
Press reset and try again.
2. If the problem still exists.
follow the local procedures
for reporting a problem
with the control unit.
650 3290T 1. Turn the power off and
then on again.
to
2. If the problem still exists.
654
contact your local IBM
representative.
657
3290T 1. Turn the power off and
then on again.
to
2. If the problem still exists.
699
contact your local IBM
representative.
PROG700 Host 1. Press reset and retry the
operation.
to
2. If the problem still exists.
PROG799
contact your host support
programmer.
Any other problem 3290T
Go to 'Problem Analysis
Procedures' on page 17.
Figure 2 (Part 3 of 3). Problems That Occur While Using the 3290 T
16
IBM 3290 T Information Panel Installation and Problem Determination Guide